Adding bridge interface

To add a new Bridge interface, follow the steps below:

Figure 1.4. Adding bridge interface

1. Under Network Interfaces > Interfaces > Bridge, add a new bridge interface by clicking the Add button.

2. Select a Network Port from the choices. You can select one or more network ports. Note: Only the lan interface that is set to manual will only be shown in the choices.

3. Provide the Network Interface Alias

4. Optional check the Allow Hotplug option

5. Assign the assignment and select from the three options:

   1. Manual

   2. Dhcp

   3. Static

   If static is chosen, provide the assigned static ip of the LAN interface.

6. Hit the Save button.

7. Reboot the system.